Fiberglass SMC Water Tank Fire Controling Water Tank
SMC combined FRP GRP water tank is assembled by moulding single panels, sealing material, metallic parts and pipeline. Water tanks could be custom-made with capacity from 0.125m3 to 5000m3 according to your needs. Generally the height should be no more than 4 meters, the length and width can be limitless.
SMC Water Tank Range Applications:
1. Residential, commercial buildings, office buildings, residential areas, offices, hotels, schools and other life, firefighting;
2. Production and living water for both industry and mining;
3. All kinds of recycled water, cooling water and water for hot water supplying system;
4. Acid and alkali storage.
The SMC FRP GRP Combined Water Tank Structure:
The SMC combined water tank consists the SMC plate, sealing materials, structural article and the pipe system. The general water tank is standard design, the special water tank need to the special design.
Accessories and specifications:
1. Support for Panels: The panels shall be supported externally or internally by an adequate support system. External Reinforcement - Hot Dipped Galvanized Steel
Internal Reinforcement - Hot Dipped Galvanized or Stainless Steel 304 rod support and tie-rod
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures
3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304
5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage. The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter
8. Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of: 600 x 600mm. the opening can be designs of bolt, seal-tight locking arrangement
9. ABS roof vent with PE insect screen
10. Float level indicator, optional SS304 for internal and external support structure are available on request
The properties of SMC plate:
| Item | Performance indicators | Item | Performance indicators |
| tensile strength Mpa | >60 | compressive strength Mpa | >145 |
| Bending strength Mpa | > 100 | shear strength Mpa | >90 |
| flexural modulus Gpa | > 7.0 | impact strength KJ/M2 | >75 |
| Pap strength | > 60 | breakdown voltage Kv/mm | 10-18 |
| Water absorption % | <1.0 | volume resistance | >10 |
| Glass fiber content % | <25 | Shrink rate % | 0.157 |
FAQ :
Q1 : Are you Manufacturer or Trading company ?
A1 : We are not only manufacturer but also Trading Company . We could help our old customer to find right suppliers .
Q2 :Can I vist your Company ?
A2: Yes ,of course ! We are warmly welcome ! If you come ,please free to contact with us . We will pick you up !
Q3 :Do you accept sample order ?
A3 : Yes , we can accept .And we also can send you sample by free !
Q4: Can you make a confidentiality for our project ?
A4 : Yes ,of course . We can sing a confidentiality agreement for you .
Contact us if you need more details on Composite Sectional GRP Water Tank. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Assembly FRP Panel Water Tank、SMC Fiberglass Water Storage Tank. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Water Tank > FRP/SCM Water Tank
